Welcome to Ningbo Wenhao Machinery Co., Ltd Official Website ! ENGLISH CHINESE
向左 向右
Your location:home>lated news>related news>detail

Bucket tooth pin driver manufacturer teaches you how to buy tooth

hits:908    date:2019-10-15

  Bucket tooth pin driver manufacturer tells you that in the process of use, the teeth should look at the working environment, to determine the specific type of tooth, generally excavation, weathered sand, face coal, etc. should use flat head teeth. For the hard rock with block shape, the RC type of tooth is used. For the block coal seam, the TL type tooth is generally used, and the TL tooth can increase the coal output rate.

bucket tooth pin

  Bucket tooth pin driver manufacturer tells you that in actual use, users often prefer general RC type tooth. It is recommended that RC type tooth not be used in special cases. It is best to use flat head tooth, because RC type tooth is worn after a period of time. Like "fist", it increases the resistance to excavation and wastes power.

  Different from the former, the flat mouth teeth always maintain a sharp surface during the wear process, reducing the excavation resistance and saving fuel. In addition, the wear of the tooth holder of the tooth is also very important for the service life of the tooth of the excavator. Regarding the service life, not only the tooth should be noticed, but also the service life is important when purchasing other products. standard.

  Bucket tooth pin driver manufacturer introduces that the tooth holder is worn out 10%-15%. It is recommended to replace the tooth holder because there is a large gap between the toothed seat and the tooth tooth, so that the tooth and the tooth seat are matched and received. The force point has changed and the tooth has broken due to a change in the force point.

Prev:Bucket tooth pin manufacturer and everyone said how long the excavator teeth change
Next:Bucket teeth pins manufacturer science bucket material and its weldability