Welcome to Ningbo Wenhao Machinery Co., Ltd Official Website ! ENGLISH CHINESE
向左 向右

Lets engine part running under the no-load situation for a certain time before normal using excavator

hits:1308    date:2016-08-13

  Before start using excavator, profession ESCO bucket tooth pin supplier suggests people to lets engine part to normal running with a low speed and under the no-load situation for a certain time first, as general, this running time is on the based of the current climate situation, after the temperature for engine part had been increases, then provide the high loads excavate works later.

  Before the normal excavate works, profession ESCO bucket tooth pin production manufacturer also suggests users to control the excavator to do each standard movements under the no-load situation first, the purpose is to ensure the excavator has no strange noise or strange phenomenon.

  To guarantee excavator can get the biggest excavate power, profession ESCO bucket tooth pin production manufacturer suggests users to reasonable standard each excavate movements first, profession ESCO bucket tooth pin production manufacturer said use standard excavate movements also can reduce the normal lose damages on the construction parts.
 

Prev:Preparation works for excavator
Next:Add lubricating grease after excavator had continue working over 5~6 hours