Welcome to Ningbo Wenhao Machinery Co., Ltd Official Website ! ENGLISH CHINESE
向左 向右
Your location:home>lated news>related news>detail

The angle for bucket tooth must be adjust on the basic of the actual move traces for bucket rod

hits:1192    date:2019-03-13

 Professional komatsu bucket teeth pins production supplier said the useful skill for oil excavate work is used the bucket rod cylinder as mainly working part, but use the swing arm cylinder as the second working part, and the angle for komatsu bucket teeth pins must be adjust along with the different move traces for excavator bucket rod, so the entirety komatsu bucket teeth pins would be direct insert into the soil, just like use the knife to cut off vegetables, but should never clamp into the soil anymore.

When control the komatsu bucket teeth pins to insert into the soil with certain depth, professional komatsu bucket teeth pins production supplier said the next step is finished the draw bucket process, but also needs raise up the excavate arm at the same time, and one perfect soil excavate action is finished.

if users needs excavate the soil with only one sides and the soil feature is very harden, to protect the excavate efficiency and shorten consume less, professional komatsu bucket teeth pins production supplier suggests users use at least two to three komatsu bucket teeth pins to insert into the soil together, but also raise up them at the same time too.

 

Prev:Bucket tooth would easily produce plasticity deformation changes due to low yield strength
Next:high chrome iron casting alloy has a better wear resistance property than high manganese steel material